dmesg - HP ProBook 6470b with i5-3320M using PAE mode
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-25-generic (buildd@kapok) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #33-Ubuntu SMP Tue Nov 4 12:05:25 UTC 2014 (Ubuntu 3.16.0-25.33-generic 3.16.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000b88fefff] usable
BIOS-e820: [mem 0x00000000b88ff000-0x00000000b9c7efff] reserved
BIOS-e820: [mem 0x00000000b9c7f000-0x00000000b9f60fff] usable
BIOS-e820: [mem 0x00000000b9f61000-0x00000000b9f7efff] ACPI NVS
BIOS-e820: [mem 0x00000000b9f7f000-0x00000000b9ffefff] ACPI data
BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable
BIOS-e820: [mem 0x00000000ba000000-0x00000000bf1fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP ProBook 6470b/179C, BIOS 68ICE Ver. F.32 12/05/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23fe00 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FF800000 mask FFF800000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BC000000 mask FFC000000 uncachable
4 base 0BB000000 mask FFF000000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 23FE00000 mask FFFE00000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x021fffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37400000-0x375fffff]
[mem 0x37400000-0x375fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x373fffff]
[mem 0x34000000-0x373fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x33ffffff]
[mem 0x20200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37600000-0x377fdfff]
[mem 0x37600000-0x377fdfff] page 4k
BRK [0x01c03000, 0x01c03fff] PGTABLE
BRK [0x01c04000, 0x01c04fff] PGTABLE
RAMDISK: [mem 0x359b8000-0x36cd3fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000F2F10 000024 (v02 HPQOEM)
ACPI: XSDT 0xB9FFE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 0xB9FFC000 00010C (v05 HPQOEM 179C 0000000F HP 00000001)
ACPI: DSDT 0xB9FD4000 022FB4 (v02 HPQOEM 179C 00000001 INTL 20110112)
ACPI: FACS 0xB9C34000 000040
ACPI: HPET 0xB9FFB000 000038 (v01 HPQOEM 179C 00000001 HP 00000001)
ACPI: APIC 0xB9FFA000 0000BC (v01 HPQOEM 179C 00000001 HP 00000001)
ACPI: MCFG 0xB9FF9000 00003C (v01 HPQOEM 179C 00000001 HP 00000001)
ACPI: ASF! 0xB9FF8000 0000A5 (v32 HPQOEM 179C 00000001 HP 00000001)
ACPI: TCPA 0xB9FF7000 000032 (v02 HPQOEM 179C 00000000 HP 00000001)
ACPI: SSDT 0xB9FD1000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
ACPI: SSDT 0xB9FD0000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
ACPI: SLIC 0xB9FCF000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: FPDT 0xB9FCD000 000044 (v01 HPQOEM 179C 00000001 HP 00000001)
ACPI: BGRT 0xB9FCC000 000038 (v00 HPQOEM 179C 00000001 HP 00000001)
ACPI: SSDT 0xB9FCB000 0009B6 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
ACPI: SSDT 0xB9FCA000 000AAD (v01 PmRef CpuPm 00003000 INTL 20110112)
ACPI: Local APIC address 0xfee00000
8326MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
BRK [0x01c05000, 0x01c05fff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x377fdfff]
HighMem [mem 0x377fe000-0x3fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0xb88fefff]
node 0: [mem 0xb9c7f000-0xb9f60fff]
node 0: [mem 0xb9fff000-0xb9ffffff]
node 0: [mem 0x00000000-0x3fdfffff]
On node 0 totalpages: 2066301
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3996 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 222718 pages, LIFO batch:31
HighMem zone: 14372 pages used for memmap
HighMem zone: 1839587 pages, LIFO batch:31
Using APIC driver default
Reserving Intel graphics stolen memory at 0xbb200000-0xbf1fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
e820: [mem 0xbf200000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f6f67000 s36480 r0 d20864 u57344
pcpu-alloc: s36480 r0 d20864 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064525
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Initializing HighMem for node 0 (000377fe:0023fe00)
Initializing Movable for node 0 (00000000:00000000)
Memory: 8166312K/8265204K available (6932K kernel code, 692K rwdata, 2908K rodata, 848K init, 796K bss, 98892K reserved, 7358348K highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffa00000 (2048 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1a4d000 - 0xc1b21000 ( 848 kB)
.data : 0xc16c56ee - 0xc1a4b280 (3606 kB)
.text : 0xc1000000 - 0xc16c56ee (6933 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f1c0c000 soft=f1c0e000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2593.960 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.92 BogoMIPS (lpj=10375840)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 36K (c1b21000 - c1b2a000)
ftrace: allocating 28622 entries in 56 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f0992000 soft=f0994000
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 2 irqstacks, hard=f0a74000 soft=f0a76000
#2
Initializing CPU#2
CPU 3 irqstacks, hard=f0ab8000 soft=f0aba000
#3
Initializing CPU#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20751.68 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xb9f61000-0xb9f7efff] (122880 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 12:46:13, date: 11/28/14
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF0A81000 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF0AC1800 000303 (v01 PmRef ApIst 00003000 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF0BFC000 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (off)
ACPI: Power Resource [LPP] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd4720000-0xd472ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd4734000-0xd473400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd473a000-0xd473afff]
pci 0000:00:19.0: reg 0x18: [io 0x4060-0x407f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd4739000-0xd47393ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd4730000-0xd4733fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd4738000-0xd47383ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd4737000-0xd47377ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-22]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010
pci 0000:23:00.0: reg 0x10: [mem 0xd4500000-0xd45007ff]
pci 0000:23:00.0: reg 0x14: [mem 0xd4505000-0xd45050ff]
pci 0000:23:00.1: [197b:2392] type 00 class 0x088000
pci 0000:23:00.1: reg 0x10: [mem 0xd4504000-0xd45040ff]
pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
pci 0000:23:00.2: [197b:2391] type 00 class 0x080501
pci 0000:23:00.2: reg 0x10: [mem 0xd4503000-0xd45030ff]
pci 0000:00:1c.2: PCI bridge to [bus 23]
pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff]
pci 0000:24:00.0: [14e4:4359] type 00 class 0x028000
pci 0000:24:00.0: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
pci 0000:24:00.0: supports D1 D2
pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
pci 0000:24:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 24]
pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xb88ff000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9f61000-0xbbffffff]
e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:02: [io 0x0200-0x027f] has been reserved
system 00:02: [io 0x1000-0x100f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0xef80-0xef9f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs SYN018e SYN0100 SYN0002 PNP0f13 (active)
system 00:07: [mem 0x20000000-0x201fffff] has been reserved
system 00:07: [mem 0x40004000-0x40004fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xbf200000-0xbf3fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-22]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xbf200000-0xbf3fffff 64bit pref]
pci 0000:23:00.1: BAR 6: assigned [mem 0xd4508000-0xd450ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 23]
pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff]
pci 0000:00:1c.3: PCI bridge to [bus 24]
pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff]
pci_bus 0000:02: resource 2 [mem 0xbf200000-0xbf3fffff 64bit pref]
pci_bus 0000:23: resource 1 [mem 0xd4500000-0xd45fffff]
pci_bus 0000:24: resource 1 [mem 0xd4400000-0xd44fffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
pci 0000:00:14.0: enabling device (0000 -> 0002)
pci 0000:00:14.0: can't derive routing for PCI INT A
pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
pci 0000:00:14.0: can't derive routing for PCI INT A
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19568K (f59b8000 - f6cd4000)
resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than reserved [mem 0xfed10000-0xfed13fff]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at /build/buildd/linux-3.16.0/arch/x86/mm/ioremap.c:183 __ioremap_caller+0x2f4/0x370()
Info: mapping multiple BARs. Your kernel is fine.
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-25-generic #33-Ubuntu
Hardware name: Hewlett-Packard HP ProBook 6470b/179C, BIOS 68ICE Ver. F.32 12/05/2012
00000000 00000000 f1c83d04 c16bca2b f1c83d48 f1c83d38 c105eec2 c18af498
f1c83d64 00000001 c18af43c 000000b7 c10516d4 000000b7 c10516d4 fed10000
00000000 f8068000 f1c83d50 c105ef13 00000009 f1c83d48 c18af498 f1c83d64
Call Trace:
[] dump_stack+0x41/0x52
[] warn_slowpath_common+0x82/0xa0
[] ? __ioremap_caller+0x2f4/0x370
[] ? __ioremap_caller+0x2f4/0x370
[] warn_slowpath_fmt+0x33/0x40
[] __ioremap_caller+0x2f4/0x370
[] ? snb_uncore_imc_init_box+0x5e/0x80
[] ioremap_nocache+0x1f/0x30
[] ? snb_uncore_imc_init_box+0x5e/0x80
[] snb_uncore_imc_init_box+0x5e/0x80
[] uncore_pci_probe+0xb2/0x190
[] pci_device_probe+0x6f/0xd0
[] ? sysfs_create_link+0x25/0x50
[] driver_probe_device+0x93/0x3c0
[] ? pci_match_device+0xd2/0x100
[] __driver_attach+0x79/0x80
[] ? __device_attach+0x40/0x40
[] bus_for_each_dev+0x4f/0x80
[] driver_attach+0x1e/0x20
[] ? __device_attach+0x40/0x40
[] bus_add_driver+0x167/0x240
[] ? uncore_types_init+0x176/0x176
[] ? uncore_types_init+0x176/0x176
[] driver_register+0x5d/0xf0
[] ? uncore_types_init+0xfb/0x176
[] __pci_register_driver+0x33/0x40
[] intel_uncore_init+0x156/0x39a
[] ? uncore_types_init+0x176/0x176
[] do_one_initcall+0xc6/0x200
[] ? uncore_types_init+0x176/0x176
[] kernel_init_freeable+0x152/0x1cf
[] kernel_init+0x10/0xe0
[] ret_from_kernel_thread+0x21/0x30
[] ? rest_init+0x70/0x70
---[ end trace fe70d6e48e01b62f ]---
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1417178774.104:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 1616
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:23:00.0: Signaling PME through PCIe PME interrupt
pci 0000:23:00.1: Signaling PME through PCIe PME interrupt
pci 0000:23:00.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x900x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 5632k, total 5632k
Console: switching to colour frame buffer device 200x56
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (32 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (39 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (35 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (25 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (127 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4739000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-25-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4738000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-25-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-25-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-25-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 0e3eee904a0b15da747976779a3f68a4bb683605'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
isapnp: No Plug & Play device found
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
evm: HMAC attrs: 0x1
Magic number: 6:643:785
rtc_cmos 00:03: setting system clock to 2014-11-28 12:46:15 UTC (1417178775)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 848K (c1a4d000 - c1b21000)
Write protecting the kernel text: 6936k
Write protecting the kernel read-only data: 2912k
NX-protecting the kernel data: 5352k
systemd-udevd[109]: starting version 208
random: systemd-udevd urandom read with 2 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
PTP clock support registered
sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA
sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30)
sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface.
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
tsc: Refined TSC clocksource calibration: 2594.107 MHz
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:46:a0:39:b3:9a
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
usb 1-1.3: New USB device found, idVendor=0461, idProduct=4dfd
usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-1.3: Product: HP HD Webcam [Fixed]
usb 1-1.3: Manufacturer: Primax Electronics Ltd.
usb 1-1.3: SerialNumber: PMX02
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737100 irq 46
ata2: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737180 irq 46
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737280 irq 46
ata5: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737300 irq 46
ata6: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737380 irq 46
usb 2-1.6: new full-speed USB device number 3 using ehci-pci
usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: BCM20702A0
usb 2-1.6: Manufacturer: Broadcom Corp
usb 2-1.6: SerialNumber: F4B7E2FB3AC8
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: KINGSTON SV300S37A120G, 541ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATAPI: hp DVDRAM GT80N, R102, max UDMA/100
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp DVDRAM GT80N R102 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Switched to clocksource tsc
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400, board id: 1623, fw id: 753753
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
Adding 8263676k swap on /dev/sda6. Priority:-1 extents:1 across:8263676k SSFS
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-udevd[351]: starting version 208
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input12
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
hp_accel: hardware type HPB64xx found
lis3lv02d: 8 bits 3DC sensor found
wmi: Mapper loaded
lp0: using parport0 (interrupt-driven).
[drm] Initialized drm 1.1.0 20060810
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13
mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
audit: type=1400 audit(1417175178.129:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=498 comm="apparmor_parser"
audit: type=1400 audit(1417175178.129:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=498 comm="apparmor_parser"
audit: type=1400 audit(1417175178.129:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=498 comm="apparmor_parser"
media: Linux media interface: v0.10
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Linux video capture interface: v2.00
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1417175178.169:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=518 comm="apparmor_parser"
audit: type=1400 audit(1417175178.169:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=518 comm="apparmor_parser"
audit: type=1400 audit(1417175178.169:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=518 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usbcore: registered new interface driver btusb
init: cups main process (519) killed by HUP signal
init: cups main process ended, respawning
cfg80211: Calling CRDA to update world regulatory domain
uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (0461:4dfd)
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
checking generic (c0000000 580000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 48 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
wlan0: Broadcom BCM4359 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
init: failsafe main process (653) killed by TERM signal
audit: type=1400 audit(1417175178.797:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=776 comm="apparmor_parser"
audit: type=1400 audit(1417175178.797:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=776 comm="apparmor_parser"
audit: type=1400 audit(1417175178.797:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=776 comm="apparmor_parser"
random: nonblocking pool is initialized
systemd-logind[778]: Watching system buttons on /dev/input/event2 (Power Button)
systemd-logind[778]: Watching system buttons on /dev/input/event1 (Lid Switch)
systemd-logind[778]: Watching system buttons on /dev/input/event0 (Sleep Button)
systemd-logind[778]: New seat seat0.
input: HP WMI hotkeys as /devices/virtual/input/input14
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
systemd-logind[778]: Watching system buttons on /dev/input/event10 (Video Bus)
sound hdaudioC0D0: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0xc
sound hdaudioC0D0: Internal Mic=0x11
sound hdaudioC0D0: Line=0xf
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
audit_printk_skb: 39 callbacks suppressed
audit: type=1400 audit(1417175180.905:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1166 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1378) terminated with status 1
systemd-logind[778]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[778]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[778]: New session c1 of user ata.
systemd-logind[778]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
audit: type=1400 audit(1417175208.857:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2246 comm="apparmor_parser"
audit: type=1400 audit(1417175208.857:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2246 comm="apparmor_parser"
audit: type=1400 audit(1417175208.873:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=2246 comm="apparmor_parser"
systemd-logind[778]: Lid closed.
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
systemd-logind[778]: Lid opened.
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
cfg80211: Calling CRDA to update world regulatory domain
parport_pc 00:04: disabled
PM: suspend of devices complete after 428.740 msecs
PM: late suspend of devices complete after 14.281 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.954 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
Broke affinity for irq 19
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
Broke affinity for irq 16
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Initializing CPU#2
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Initializing CPU#3
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:02: Turning OFF
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 24.479 msecs
PM: early resume of devices complete after 0.227 msecs
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
e1000e 0000:00:19.0: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
sd 0:0:0:0: [sda] Starting disk
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
parport_pc 00:04: activated
usb 1-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.6: reset full-speed USB device number 3 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
firewire_core 0000:23:00.0: rediscovered device fw0
PM: resume of devices complete after 605.128 msecs
PM: Finishing wakeup.
Restarting tasks ...
acpi PNP0501:00: Still not present
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
done.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
systemd-logind[778]: Power key pressed.
e1000e: eth0 NIC Link is Down
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
parport_pc 00:04: disabled
PM: suspend of devices complete after 415.999 msecs
PM: late suspend of devices complete after 14.220 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.028 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Initializing CPU#2
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Initializing CPU#3
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:02: Turning OFF
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 25.632 msecs
PM: early resume of devices complete after 0.294 msecs
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
e1000e 0000:00:19.0: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
parport_pc 00:04: activated
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
usb 1-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.6: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
atkbd serio0: Failed to enable keyboard on isa0060/serio0
atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
firewire_core 0000:23:00.0: rediscovered device fw0
PM: resume of devices complete after 613.084 msecs
PM: Finishing wakeup.
Restarting tasks ...
acpi PNP0501:00: Still not present
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
done.
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
systemd-logind[778]: Failed to start unit user@112.service: Unknown unit: user@112.service
systemd-logind[778]: Failed to start user service: Unknown unit: user@112.service
systemd-logind[778]: New session c2 of user lightdm.
systemd-logind[778]: Linked /tmp/.X11-unix/X1 to /run/user/112/X11-display.
systemd-logind[778]: Operation finished.
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
systemd-logind[778]: Power key pressed.
e1000e: eth0 NIC Link is Down
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
init: anacron main process (26720) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
parport_pc 00:04: disabled
PM: suspend of devices complete after 427.923 msecs
PM: late suspend of devices complete after 14.275 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.014 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
Broke affinity for irq 46
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Initializing CPU#2
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Initializing CPU#3
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:02: Turning OFF
acpi LNXPOWER:01: Turning OFF
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 25.279 msecs
PM: early resume of devices complete after 0.293 msecs
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
e1000e 0000:00:19.0: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
sd 0:0:0:0: [sda] Starting disk
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
usb 1-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.6: reset full-speed USB device number 3 using ehci-pci
parport_pc 00:04: activated
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
firewire_core 0000:23:00.0: rediscovered device fw0
PM: resume of devices complete after 602.118 msecs
PM: Finishing wakeup.
Restarting tasks ...
acpi PNP0501:00: Still not present
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
done.
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
systemd-logind[778]: New session c3 of user lightdm.
systemd-logind[778]: Operation finished.
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
systemd-hostnamed[28426]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
systemd-logind[778]: Power key pressed.
e1000e: eth0 NIC Link is Down
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
parport_pc 00:04: disabled
PM: suspend of devices complete after 421.662 msecs
PM: late suspend of devices complete after 14.250 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.005 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
Broke affinity for irq 18
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Initializing CPU#2
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Initializing CPU#3
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:02: Turning OFF
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 28.781 msecs
PM: early resume of devices complete after 0.343 msecs
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
e1000e 0000:00:19.0: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
sd 0:0:0:0: [sda] Starting disk
parport_pc 00:04: activated
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
usb 1-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.6: reset full-speed USB device number 3 using ehci-pci
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
firewire_core 0000:23:00.0: rediscovered device fw0
sound hdaudioC0D0: hda-codec: out of range cmd 0:1:715:fffffffe
PM: resume of devices complete after 1027.622 msecs
PM: Finishing wakeup.
Restarting tasks ...
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
acpi PNP0501:00: Still not present
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
done.
systemd-logind[778]: New session c4 of user lightdm.
systemd-logind[778]: Operation finished.
systemd-logind[778]: Lid closed.
systemd-logind[778]: Lid opened.
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: upstart-udev-bridge main process (337) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (573) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (774) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)